Description
FEATURES
– Supports Links up to 30m using Cat 6a/7 Cable
– SFF-8431 and SFF-8432 MSA Compliant
– IEEE 802.3az Compliant
– Low Power Consumption (2.5W max @ 30m)
– Fast Retrain EMI Cancellation Algorithm
– Low EMI Emissions
– I2C 2 Wire Serial Interface for Serial Id and Phy Registers
– Auto-negotiates with other 10GBase-T-NC PHYs
– Automatic Detection and Correction of Wiring and Polarity Swaps
– Robust Die Cast Housing
– Bail Latch Style ejector mechanism
– Unshielded and Shielded cable support
DESCRIPTION
The SFP-10G-T-DS copper transceiver module is a high performance integrated duplex data link for
bi-directional communication over copper cable. It is specifically designed for high speed communication links
that require 10Gigabit Ethernet over Cat 6a/7 cable.This is the first SFP+ transceiver that offers 10Gb/s
communication over this type of media.
General Specification
| Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
|---|---|---|---|---|---|---|
| Bit Error Rate | BER | 10-12 | ||||
| Operating Temperature | TOP | -5 | 85 | °С | Case temperature | |
| Storage Temperature | TSTO | -40 | 85 | °С | Ambient temperature | |
| Operating Humidity | - | 5 | 95 | % | Non condensing | |
| Power @30m | IS | 2.3 | 2.5 | W | ||
| Input Voltage | VCC | 3 | 3.3 | 3.6 | V |
1. Pin Assignment
| PIN # | Symbol | Description |
|---|---|---|
| 1 | VEET | Transmitter ground (common with receiver ground) |
| 2 | VFAULT | Transmitter Fault. |
| 3 | TDIS | Transmitter Disable. Laser output disable on high or open |
| 4 | SDA | Data Line for serial ID |
| 5 | SCL | Clock line for serial ID |
| 6 | MOD_ABS | Module Absent. Grounded within the module |
| 7 | RS0 | No connection required |
| 8 | LOS | Loss of Signal indication. Logic 0 indicates normal operation |
| 9 | RS1 | No connection required |
| 10 | VEER | Receiver ground (common with transmitter ground) |
| 11 | VEER | Receiver ground (common with transmitter ground) |
| 12 | RD- | Receiver Inverted DATA out. AC coupled |
| 13 | RD+ | Receiver Non-inverted DATA out. AC coupled |
| 14 | VEER | Receiver ground (common with transmitter ground) |
| 15 | VCCR | Receiver power supply |
| 16 | VCCT | Transmitter power supply |
| 17 | VEET | Transmitter ground (common with receiver ground) |
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC coupled |
| 19 | TD- | Transmitter Inverted DATA in. AC coupled |
| 20 | VEET | Transmitter ground (common with receiver ground) |
Note:
1. IEEE standard 802.3ae. IEEE Standard Department, 2005.
2. Enhanced 8.5 and 10 Gigabit Small Form Factor Pluggable Module “SFP+” – SFF-8431
3. Digital Diagnostics Monitoring Interface for Optical Transceivers – SFF-8472.
2. Electrical Pad Layout
3. Mechanical Specifications
4. Compatibility
| Brand Compatible | Abbreviation |
|---|---|
| Cisco | CO |
| Juniper | JU |
| Arista | AR |
| Brocade | BR |
| HPE | HP |
| Aruba | AU |
| H3C | H3 |
| Dell | DE |
| Intel | IN |
| Extreme | EX |
| Huawei | HU |
| Netgear | NE |
| Mellanox | ME |
| Broadcom | BO |
| Ciena | CI |
| Avago | AV |
| Table Data | Avaya |
| Table Data | AY |
| Alcatel-lucent | AL |
| D-link | DL |
| F5 | F5 |
| Ubiquiti | UB |
| Allied Telesis | AT |
| SMC Networks | SN |
| Trendnet | TR |
| Nokia | NK |
| Fortinet | FN |
| Others on Request | GN |
5. Ordering information
| Part number | Operating Case temperature |
|---|---|
| SFP-10G-T-DS | Copper SFP,10.125 Gb/s, RJ-45 connector,30M, 0°C to +70°C |
